RENOFORM MF 9

Pasty, pigment-free drawing grease for tube, rod and coarse wire drawing. RENOFORM MF 9 is low in mineral oil and contains a combination of polar substances and lubricating component without solid matters. RENOFORM MF 9 contains no chlorine. RENOFORM MF 9 is also partly suitable for non-ferrous metals. Can be used pure or diluted with water. Can be applied to the work pieces by rolling, brushing or spraying. Can be degreased with aqueous alkaline cleaners (Use of RENOCLEAN industrial cleaners is recommended).

Specification	pH value is 7.6
Recommendations	Recommended concentration: 10% to 50%. RENOFORM MF 9 is sufficient for all chipless forming operations such as drawing and deep drawing of sheets and also for tube and bar drawing.

Product Product information

RENOFORM MBO

Non-water miscible, high performance forming oils for...

Specification
Viscosity at 20 Â°C - 5.4
Viscosity Grades
ISO VG 46, ISO VG 68, ISO VG 150, ISO VG 460
Series
RENOFORM MBO 2755 HD, RENOFORM MBO 2797, RENOFORM MBO 68, RENOFORM MBO 369/2, RENOFORM MBO 369 UNI, RENOFORM MBO 2907, RENOFORM MBO 2907 HV,

RENOFORM MF 9

Pasty, pigment-free drawing grease for tube, rod and...

Specification
pH value is 7.6
Recommendations
Recommended concentration: 10% to 50%. RENOFORM MF 9 is sufficient for all chipless forming operations such as drawing and deep drawing of sheets and also for tube and bar drawing.