WELCOME TO SELTEC

Home
Products

Pneumatic Diaphragm Pumps

Air Operated Double Diaphragm Pumps ( AODDP )

It is mainly developed around the air distribution system, the diaphragm’s high technology, the pumping chambers geometry and the valves system; this in order to extend the functionality, not only for transfer but also for dosing. FLUIMAC's diaphragm pumps are made in PP, PVDF, ALLUMINIO and AISI 316.

Pump Operation:

1. Suction Cycle

Compressed air fills left inner chamber, causing the opposing diaphragm to create suction, lifting the lower valve ball, pulling in fluid at the inlet.

Simultaneously the right chamber is in discharge cycle.

2. Discharge Cycle

Compressed air fills right inner chamber, causing upper ball valve to open and discharge fluid.

Simultaneously the left chamber is in discharge mode.

Markets & Applications

Automotive, Mechanical, Chemical, Food, Bio Diesel, Ceramic, Textile & Leather, Paint & Varnish, Naval and Petrochemical, Pulp and paper, Pharmaceutical and cosmetic, Mining, Galvanic, Oil & Gas, Water Treatment & Printing Inks.

Features & Benefits

100% wet tested after final assembly: deadheading, priming and sealing.
ATEX certifications in all versions: Conductive plastic pumps available.
Portable and compact for multi- location use, optionally with trolley
Dry run without damaging the pump or system: seal-less design
Fully submersible: can be submerged completely according to the fluid compatibility
Special air exhaust. Designed to operate at low noise levels.
Serviceability, easily maintained and quickly without any special tools.
Self-priming dry up to 6mtrs. Works in suction lift applications.
Safely dead head function, against closed discharge, without pump damage
Wide range of sizes and materials suited for variety of conditions and chemical fluids
Variable flow and head pressures, easy to adjust, without sophisticated controls
All bolted construction. It provides maximum leak resistance and safety
Can customize to specific applications. Multiple porting options available along with interface options
Efficient performance. High flow rates through optimal casings designs.
All plastic air system, Strong and corrosion resistant in harsh environments.
Handles liquids with solid particles. Ideal for abrasive and viscous media.
Efficient air distribution deisgn, low air consumption.

Product Product information

Specification
Connections: 1/4" BSP Max flow-rate: 8 lt/min Air connection: 4 mm Max.head: 80 m Self- priming capacity: 3 m Diameter of passing solids: 2.5 mm Max. Pressure: 8 Bar Noise level: 62 dB Max. Viscosity: 6000 cps Materials: PP, PVDF, POMc.

P18

Specification
Connections: 3/8" BSP Max flow-rate: 20 lt/min Air connection: 6 mm Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 3 mm Max. Pressure: 8 Bar Noise level: 65 dB Max. Viscosity: 12000 cps Materials: PP, PVDF, POMc, SS.

P30

Specification
Connections: 1/2" BSP Max flow-rate: 35 lt/min Air connection: 6 mm Max.head: 80 m Self- priming capacity: 5 m Diameter of passing solids: 3.5 mm Max. Pressure: 8 Bar Noise level: 65 dB Max. Viscosity: 15000 cps Materials: PP, PVDF, POMc, SS.

P50

Specification
Connections: 1/2" BSP Max flow-rate: 55 lt/min Air connection: 1/4" BSP Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 3 mm Max. Pressure: 8 Bar Noise level: 68 dB Max. Viscosity: 20000 cps Materials: PP, PVDF, ALU, SS.

P65

Specification
Connections: 1/2" BSP Max flow-rate: 70 lt/min Air connection: 3/8" BSP Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 3.5 mm Max. Pressure: 8 Bar Noise level: 72 dB Max. Viscosity: 25000 cps Materials: PP, PVDF, ALU, INOX.

P100

Specification
Connections: 3/4" BSP Max flow-rate: 110 lt/min Air connection: 3/8" BSP Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 3.5 mm Max. Pressure: 8 Bar Noise level: 72 dB Max. Viscosity: 25000 cps Materials: PP, PVDF, ALU, INOX.

P160

Specification
Connections: 1" BSP Max flow-rate: 170 lt/min Air connection: 1/2" BSP Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 7.5 mm Max. Pressure: 8 Bar Noise level: 75 dB Max. Viscosity: 35000 cps Materials: PP, PVDF, ALU, INOX.

P250

Specification
Connections: 1 1/4" BSP Max flow-rate: 250 lt/min Air connection: 1/2" BSP Max.head: 80 m Self- priming capacity: 6 m Diameter of passing solids: 7.5 mm Max. Pressure: 8 Bar Noise level: 75 dB Max. Viscosity: 35000 cps Materials: PP, PVDF, ALU, INOX.

P400

Specification
Connections: 1 1/2" BSP Dn 40. Max flow-rate: 380 lt/min Air connection: 3/4" BSP Max.head: 80 m Self- priming capacity: 5 m Diameter of passing solids: 8 mm Max. Pressure: 8 Bar Noise level: 78 dB Max. Viscosity: 40000 cps Materials: PP, PVDF, ALU, AISI 316.

P500

Specification
Connections: 1 1/2" BSP Dn 40 Max flow-rate: 550 lt/min Air connection: 3/4" BSP Max.head: 80 m Self- priming capacity: 5 m Diameter of passing solids: 8.5 mm Max. Pressure: 8 Bar Noise level: 78 dB Max. Viscosity: 50000 cps Materials: PP, PVDF, ALU, INOX.

P700

Specification
Connections: 2" BSP Dn 50 Max flow-rate: 700 lt/min Air connection: 3/4" BSP Max.head: 80 m Self- priming capacity: 5 m Diameter of passing solids: 8.5 mm Max. Pressure: 8 Bar Noise level: 78 dB Max. Viscosity: 50000 cps Materials: PP, PVDF, ALU, INOX.

P1000

Specification
Connections: 3" BSP Dn 80 Max flow-rate: 1050 lt/min Air connection: 3/4" BSP Max.head: 80 m Self- priming capacity: 5 m Diameter of passing solids: 10 mm Max. Pressure: 8 Bar Noise level: 78 dB Max. Viscosity: 55000cps Materials: PP, PVDF, ALU, INOX.

Inquiry Form

Service Links

Product Assistant

Product Finder

Products

CATEGORIES

Pneumatic Diaphragm Pumps

Inquiry Form

Service Links

Seltec FZC
Hamriya Free Zone, Sharjah,
PO Box: 49714, United Arab Emirates.

Land Line : +971 4 2524938

info@seltecuae.com