Coreless Brass Electrodes

Brass electrodes come in both single hole and multi-channel (coreless) varieties, including web-type, two hole, three hole, and y-type electrodes. Brass electrodes have a faster wear rate than copper electrodes, which results in a faster drill speed when the target material is not tough. The hollow portion of an electrode exists to facilitate the flow of dielectric fluid through the electrode. This serves to cool down the electrode, which is very important, as an overheated electrode can result in warping and a corresponding drop in precision. It also flushes loose material from the hole that is being drilled.

Product Product information

Flushing Nozzle

Flushing nozzles are used for flushing process....

Filters

High speed cutting with wire electrical discharge...

Specification
Paper Filter small - 10mm Paper Filter Big - 10 micron

Ion Exchange Resins

Ion exchange Resin is made from strong acid...

Specification
Deion Resin

Wire Guides

Wire Guides is used to guide the passage of wire electrodes....

Specification
Wire Guide 0.25 mm DIA M117 Wire Guide 0.25 mm DIA M10

EDM Wires

Wire electrical discharge machining (EDM) is a non...

Specification
Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - P5 Size (1 spool = 5 Kgs) Zinc coated Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs) Elektra Plain Brass Edm Wire 0.25 mm Soft / Hard - DIN 125 Size (1 spool = 3.5 Kgs)

Current PickUps

Current Pick-up is widely used to deliver...

Coreless Brass Electrodes

Brass electrodes come in both single hole and multi-channel...