| Product |
Product information |
| RENOLIN 200 |
Reciprocating (piston) and rotary air compressor oils...
| Specification |
| DIN 51 517-1, DIN 51 506: VB, DIN 51 506: VC. For final compression temperatures of up to 160 °C. |
| Viscosity Grades |
| ISO VG 100, ISO VG 150, ISO VG 220, ISO VG 320 |
| Series |
| RENOLIN 208, RENOLIN 210, RENOLIN 212,RENOLIN 213, RENOLIN 215 |
|
| RENOLIN 500 |
Cooling oil for reciprocating & rotary vane compressors...
| Specification |
| DIN 51 506: VDL. For final compression temperatures up to 220 °C. |
| Recommendations |
| Recommended for reciprocating piston compressors with air discharge temperatures up to 220 °C |
| Viscosity Grades |
| ISO VG 68, ISO VG 100, ISO VG 150 |
| Series |
| RENOLIN 503, RENOLIN 504, RENOLI 505 |
|
| RENOLIN VDL DD |
The RENOLIN VDL DD oils are air compressor oils for...
| Specification |
DIN 51 506: VDL. For final compression temperatures up to 220 °C,
|
| Viscosity Grades |
| ISO VG 100, ISO VG 150 |
| Series |
| RENOLIN VDL 100 DD, RENOLIN VDD 150 DD |
|
| RENOLIN SC |
Cooling oils for screw compressors with additives to...
| Specification |
DIN 51 519. Final compression temperatures up to 110 °C.
|
| Viscosity Grades |
| ISO VG 32, ISO VG 46, ISO VG 68. |
| Series |
| RENOLIN SC 32, RENOLIN SC 46, RENOLIN SC 68 |
|
| RENOLIN COOL+ |
New generation air compressor fluid for oil-injected...
| Specification |
| DIN 51506 VDL |
| Recommendations |
| Recommended for use in oil filled screw compressors. |
| Viscosity Grades |
| ISO VG 46 |
|
| RENOLIN UNISYN OL |
Fully synthetic hydraulic oils based on polyalphaolefines....
| Specification |
DIN 51506: VDL, ISO DP 6521 (draft): L-DAB, L-DAH / L-DAG, DIN 51524: HLP (HVLP).
|
| Recommendations |
| RENOLIN UNIYSYN OL 32, 46 and 68 have especially been developed for the use in oil injected screw compressors and in turbo compressors. RENOLIN UNISYN OL 100 and 150 are recommended in particular for long term use in piston and rotary compressors. |
| Viscosity Grades |
| ISO VG 32, ISO VG 46, ISO VG 68, ISO VG 100, ISO VG 150 |
| Series |
| RENOLIN UNISYN OL 32, RENOLIN UNISYN OL 46, RENOLIN OL 68, RENOLIN UNISYN OL 100, RENOLIN UNISYN OL 150 |
|
| RENOLIN SE |
The RENOLIN SE are synthetic compressor lubricants...
| Specification |
| DIN 51 506: VDL. |
| Viscosity Grades |
| ISO VG 68, ISO VG 100 |
| Series |
| RENOLIN SE 68, RENOLIN SE 100 |
|
| RENOLIN VAC 100 F |
RENOLIN VAC 100 F is based on highly refined mineral...
| Specification |
| DIN 51 519 |
| Recommendations |
| Recommended for use in all basic types of vacuum pumps. |
| Viscosity Grades |
| ISO VG 100 |
|
| RENOLIN SynAir 46 |
Biodegradable Synthetic Polyglycol (PG) based air compressor...
| Specification |
| Excellent biodegradability (>60%) according to OECD 301C, Service life of 8000 hours at 90 °C compression. |
| Recommendations |
| Recommended for use in flooded or oil-injected screw compressors. Also recommended for application at high temperatures to reduce oil related residues, varnish and sludge. |
| Viscosity Grades |
| ISO VG 46 |
|
| RENOLIN SC MC |
Cooling oils for screw compressors with active substances...
| Specification |
| Final compression temperatures up to 110 °C |
| Viscosity Grades |
| ISO VG 32, ISO VG 46, ISO VG 68 |
| Series |
| RENOLIN SC 32 MC, RENOLIN SC 46 MC, RENOLIN SC 68 MC |
|
| RENOLIN LPG |
RENOLIN LPG series are a high-performance synthetic...
| Specification |
| DIN EN ISO 3104 |
| Recommendations |
Not miscible and compatible with standard mineral oil based lubricants. The compression gas should be dry. Because of its polar structure, RENOLIN LPG can absorb water (more than 1%).
Common seal and elastomer materials can be used if they are compatible with polyglycol lubricants (nitrile rubber (NBR) or fluoro-silicone are recommended). Paint materials: Two-component epoxy formulations are normally resistant. |
| Viscosity Grades |
| ISO VG 100 |
| Series |
| RENOLIN LPG 100, RENOLIN LPG 185 |
|
